Installation guide

System Settings
55
3
❖
❖❖
❖ DNS Server 2 IP Address (WSM)
When a secondary DNS server runs on the network you use this machine,
specify the IP address of the secondary DNS server in the form of
xxx.xxx.xxx.xxx (xxx:0 through 255).
Note
❒ This setting can only be configured using the Web Status Monitor.
❖
❖❖
❖ DNS Server 3 IP Address (WSM)
When a third DNS server runs on the network you use this machine, specify
the IP address of the third DNS server in the form of xxx.xxx.xxx.xxx (xxx:0
through 255).
Note
❒ This setting can only be configured using the Web Status Monitor.
❖
❖❖
❖ Delivery Server IP Address
This item is automatically configured when you register this machine to a de-
livery server operated by ScanRouter V2/Professional. Do not specify this
item manually.
❖
❖❖
❖ MAC Address
This item is automatically configured.
❖
❖❖
❖ Transmission Speed
Use this item to select a network transmission speed from “Auto”,
“100Mbps” or “10Mbps”.
❖
❖❖
❖ LAN Type
Ethernet is fixed for this machine.
❖
❖❖
❖ Wireless LAN Signal
This item is disabled with this machine.
❖
❖❖
❖ Destination Search Priority
Set this item to specify the objects to use in higher priority when searching for
the E-mail addresses.
Make the settings to access the E-mail address registered in LDAP server be-
fore using this function to enable the settings in [LDAP Search Object] and
[LDAP Search Conditions].
Reference
See p.105 “Information to Register in [Search Destinations]”.
❖
❖❖
❖ Send Function Permission
Use this item to limit the function that the users can use with this machine.
With this mode, this machine can be limited to use; [E-mail Only], [SMB Only (File
Name Changeable)], [SMB Only (File Name Unchangeable)], [FTP Only (File Name
Changeable)], or [FTP Only (File Name Unchangeable)].