Installation guide

Configuring the Scanner Settings

• High Compression

Higher compression is performed with the scan data so that the file size be-

comes much smaller, while the image quality gets relatively lower (in com-

parison with normal compression).

• Low Compression

Lower compression is performed with the scan data so that the image qual-

ity becomes relatively higher, while the file size gets larger (in comparison

with normal compression).

• Off

Scanned data is not compressed. Quality is not lost, but file size and mem-

ory usage increase. File size is determined by the scanning size and resolu-

tion, regardless of the status of the original.

Note

❒ The size of compressed data varies among originals even if the same qual-

ity setting is made for them. The number of original pages that can be proc-

essed at a time also varies.

❖

❖❖

❖ Select Method

You can select a method that suits for a combination of the functions you

want to use when you perform a Send Scan operation. The following three

options are available.

• Delivery Server/TWAIN

Select this option if you want to use Delivery Server and network TWAIN.

• Send File/TWAIN

Select this option if you want to use e-mail, Send File (SMB), Send File

(FTP), and network TWAIN.

• TWAIN

Select this option if you want to use Network TWAIN only.

❖

❖❖

❖ Auto Update Destination List

• When “Delivery Server/TWAIN” is selected under [6.Select Method]

Select whether to update the contents of the Address Book automatically

with the latest data from the delivery server. When “On” is selected, the

Address Book is updated each time you press [Dest.] or [Sender] on this ma-

chine. When “Off” is selected, the Address Book is updated only when the

power is turned on.

• When “Send File/TWAIN” is selected under [6.Select Method]

Select whether to update the contents of the destination lists of e-mail ad-

dresses, send file paths, and FTP servers automatically with the latest data

registered using the Web Status Monitor’s [E-mail Address], [Send File Path]

and [FTP Server]. When “On” is selected, the destination list is updated

each time you press [E-mail] on this machine. When “Off” is selected, the

destination list is updated only when the power is turned on.