Installation guide

Scan Settings
81
3
Registering [Scan Settings]
Follow the steps below to configure
and register Scan Settings using the
control panel of this machine.
Note
❒ You can also configure these set-
tings using the Web Status Moni-
tor.
Reference
See p.14 “Using Keys Displayed on
the Screen” for information about
how to select items displayed on
the screen.
A
AA
A
Press the {
{{
{User Tools}
}}
} key.
The Scanner Features menu is dis-
played.
B
BB
B
Press the {
{{
{4}
}}
} key.
The Scan Settings menu is dis-
played.
On this menu, you can select a
memory area (“Default”, “User 1”,
“User 2”, or “User 3”) for register-
ing the Scan Settings configura-
tion.
C
CC
C
Press the {
{{
{1}
}}
} key.
The Default Scan Settings menu is
displayed, and “1. Scan Type” ap-
pears as the setup item currently
selected.
This example shows that all the us-
ers have already been configured;
if a user has not been configured,
the item is displayed in gray tone.
D
DD
D
Press [Settings].
The setting screen for “1. Scan
Type” appears.
Note
❒ Press [Exit] to return to the par-
ent menu screen.
E
EE
E
Select a scan type.
• The option that is currently se-
lected is displayed first.
•“*” mark appears along with the
option currently selected.
• Use [↑
↑↑
↑] and [↓
↓↓
↓] to display the
option you want to select.
F
FF
F
While the option you want to se-
lect is displayed, press [OK].
This saves the setting you have se-
lected, and returns to the Default
Scan Settings menu.
AFJ004S