User guide

Manual Setup

If you cannot check the settings of the access point (router) being used or the access point

(router) does not support WPS, configure the wireless LAN settings manually.

Check the SSID and encryption key (WEP key/Passphrase) by referring to the manual of the •

wireless LAN access point (router) being used.

Check the security method employed by the access point (router) being used. If you are unsure •

which security method is supported by the wireless LAN access point (router) being used, refer

to the access point (router) manual.

Device availability

Control Panel Yes

Web Image Monitor Yes

Smart Organizing Monitor No

Using control panel

If you have previously configured wireless LAN settings, configure the settings using [Setup •

Wizard] in [Network Settings]. For details about using [Setup Wizard], see "Wireless LAN Set-

up" in the User Guide .

Check that the wireless LAN access point (router) is working correctly.

Press the [Wi-Fi] key.

DCT853

If [Wi-Fi Enable] is set to [Disable], you cannot use the [Wi-Fi] key. If [Frequency Channel]

appears first, set [Wi-Fi Key] to [Infrastructure Mode].