User guide

26
Search the SSID to display the list, select the destination SSID, and then press [Next].
If you cannot find the destination SSID, configure the SSID according to the following pro-
cedure.
1. Select [Input SSID], and then press [Next].
2. Enter the SSID using the number keys, and then press [Next].
For details about checking the SSID, see page 2 "Checking the SSID and encryption key".
Select the authentication method, and then press [Next].
The next steps differ depending on the authentication method that you have selected.
Proceed to Step of the appropriate section.
If the authentication method is set to [WPA2-PSK] or [Mix Mode WPA2/WPA] •
If the authentication method is set to [Open System] or [Shared Key] •