User guide

27
Connecting to devices using the WPA2-PSK or Mix Mode WPA2/WPA au-
thentication
Enter the encryption key using the number keys, and then press [Connect].
For details about checking the encryption key, see page 2 "Checking the SSID and encryp-
tion key".
For details about the number of characters used for the encryption key, see page 3 "Number
of characters used for the encryption key" in 1, "Before Configuring Wireless LAN Settings".
Press [Yes].
Check the connection using [Wi-Fi Status].
[User Tools] key [Network Settings] [Wi-Fi] [Wi-Fi Status]
When "Connected" is displayed, the connection has been established.•
When "Connecting..." is displayed, the connection is being established.•
When "Disconnected" is displayed, the connection has not been established. Start again •
from the beginning.
Configuring the Wi-Fi settings is complete.
The next step is to install the driver from the CD-ROM provided.
For details, see Setup Guide.
Connecting to the devices using the Open System or Shared Key authentica-
tion
Select the encryption method, and then press [Next].
Enter the encryption key and ID using the number keys, and then press [Connect].
The ID is used for identifying the encryption key. You can register four encryption keys (ID
1 to 4).
For details about checking the encryption key, see page 2 "Checking the SSID and encryp-
tion key".
For details about the number of characters used for the encryption key, see page 3 "Number
of characters used for the encryption key" in 1, "Before Configuring Wireless LAN Settings".