User guide

30
Connection was Successful but Wireless LAN Cannot be Used
If a connection has been established but the wireless LAN cannot be used, check the following:
Connection may fail due to radio wave conditions. ■
If there is another wireless network nearby, the wireless connection may fail. Wait for a •
while, and then connect to the network again.
Are the IP address settings correctly configured? ■
Make sure the IP address settings are configured correctly.•
Configuring the IPv4 address for wireless LAN connection•
SP 212w/SP 212Nw/SP 213w/SP 213Nw (Smart Organizing Monitor)•
[User Tools] tab [IP Address]
SP 212SNw/SP 212SUw/SP 212SFw/SP 212SFNw/SP 213SNw/SP 213SUw/SP 213SFw/ •
SP 213SFNw (Control Panel)
[User Tools] key [Network Settings] [IPv4 Configuration]
Configuring the IPv6 address for wireless LAN connection•
For details , see "Configuring Network Settings" in the User Guide .
The previously established connection cannot be established again. ■
To reconfigure the wireless LAN settings, first reset the network settings.
SP 212SNw/SP 212SUw/SP 212SFw/SP 212SFNw/SP 213SNw/SP 213SUw/SP 213SFw/•
SP 213SFNw(Control Panel)
[User Tools] key [Admin. Tools] Reset Settings [Reset Network Settings] [Yes]