Service manual

Utilities
M145/M146/M147/M148/M149/M150/M151 5-62 SM
Modem Settings
Cable Equalizer
Improves the pass-band characteristics of analog
signals on a telephone line.
 General Value (Default)
 0 Km
 1.8 Km
 3.6 Km
 7.2 Km
First TX Speed
Sets the transmission start speed.
 V.34 First TX Speed (Default: 33600 bps)
 V.17 First TX Speed (Default: 14400 bps)
 V.29 First TX Speed (Default: 9600 bps)
 V.27 First TX Speed (Default: 4800 bps)
Note:
 If 33.6 is selected for TX Speed setting in User Tool,
the V.34 First TX Speed setting in Service Mode is
enabled.
 In this case, the Service Mode setting is given
priority over the 33.6 setting in User Tool, so the
actual First TX Speed is not always 33.6.
First RX Speed
Sets the reception start speed.
 V.34 First RX Speed (Default: 33600 bps)
 V.17 First RX Speed (Default: 14400 bps)
 V.29 First RX Speed (Default: 9600 bps)
 V.27 First RX Speed (Default: 4800 bps)
Note:
 If 33.6 is selected for RX Speed setting in User Tool,
the V.34 First RX Speed setting in Service Mode is
enabled.
 In this case, the Service Mode setting is given
priority over the 33.6 setting in User Tool, so the
actual First RX Speed is not always 33.6.