Service manual

Utilities
SM 5-63 M145/M146/M147/M148/M149/M150/M151
System
Maintenance
Reference
Protocol Definition
Training Retries
Sets the number of training retries to be repeated before
automatic fallback takes effect.
 1 Time: Reduce speed to next level after 2 PPR
commands.
 2 Times: (Default) Reduce speed to next level after
3 PPR commands.
 3 Times: Reduce speed to next level after 4 PPR
commands.
 4 Times: Reduce speed to next level after 2 PPR
commands.
Encoding
Selects data compression mode for TX/RX. The first
selection is the most complex, the third selection the
least complex:
 MMR+MR+MH (Default)
 MR+MH
 MH
Protocol Definition Timer
T0 Timer
Timeout for the remote station to respond in automatic
send mode.
 Default: 60 sec.
 Range: 35, 45, 55, 60, 90, or 140 sec.
T1 Timer
Sets the DIS waiting time.
 Default: 40 sec.
 Range: 40 or 50 sec.
T4 Timer
Sets the time interval between command signal
transmissions.
 Default: 3 sec.
 Range: 3 or 4.5 sec.