Specifications

11
GDI Printer Driver Installation
NOTE: Before beginning the driver installation ensure you are in
possession of your Windows Operating System CD.
Once the UC5 has been installed, you will need to install a GDI printer driver.
Please follow the instructions relating to the operating system installed on the PC
connected to the UC 5.
Note: To allow fastest printing to the UC 5, we recommend that the parallel port
is set to “ECP Mode”. On most new PC’s this is the default setting. However, on
older PC’s you may have to set this in the BIOS configuration utility. If you are
unsure of how to do this, please check with your PC supplier, or IT support staff.
As a guide, most PC’s enter the BIOS when either “delete” or “F1” keys are
pressed at boot up. Once the BIOS programme is running the “Parallel Port
Mode” setting can generally be found in the “Chipset Features” or “Integrated
Peripherals” section.
The following pages will give detailed and illustrated instructions on how to
install the GDI Printer driver for the following operating systems:-
Windows 3.11
Windows 95/98
Windows NT
Windows 2000