Operation Manual

87
3
Taking Pictures
If you have registered two or three pets, choose the pet you want
to detect.
1 Press the I button on
the capture status screen
in e (Pet) mode.
The pet selection screen appears.
2 Use the four-way controller (45) to select the pet you want
to detect.
3 Press the 4 button.
The selected pet is switched to the pet you want to detect and
the camera returns to capture status.
1 Press the I button on
the capture status screen
in e (Pet) mode.
The pet selection screen appears.
2 Use the four-way controller (45) to select the pet you want
to delete.
3 Press the Green button.
4 Use the four-way controller (2) to select [Delete].
5 Press the 4 button.
The selected pet is deleted.
To Switch the Pet You Want to Shoot
To Delete the Pet from the Entry
• [Focusing Area] is set to W (Automatic Tracking AF) and the flash
mode is set to a (Flash Off). However, you can change these settings.
• [Focus Assist] is set to off. However, you can change this setting.
OK
OK
Delete
MENU
Cancel
Selecting pet to shoot
OK
OK
Delete
MENU
Cancel
Selecting pet to shoot
WG20_OPM_ENG.book Page 87 Wednesday, February 5, 2014 2:20 PM