Quick Start
Table Of Contents
- Using Your Camera Safely
- Care to be Taken During Handling
- Contents
- Checking the Contents of the Package
- Names of Parts
- Names of Operating Parts
- Display Indications
- Powering the Camera
- Installing an SD Memory Card
- Turning the Camera On and Off
- Initial Settings
- Setting the Camera Functions
- Taking Still Pictures
- Setting the Shooting Functions
- Recording Movies
- Playing Back Images
- Deleting Images
- Appendix
21
Turning the Camera On and Off
1
Press the power button.
The camera turns on and both the power lamp and display turn on.
If the [Language/ ] screen or [Date Adjustment] screen appears when you
turn the camera on, follow the procedure on p.22 to set the display language and/
or current date and time.
2
Press the power button again.
The camera turns off and both the power lamp and display turn off.
The SD Memory Card is checked when the
camera turns on and the memory status is
displayed.
Use this function when you want to play back images straightaway without taking
any picture.
1
Press and hold down the Q button.
The display turns on and the camera starts up in playback mode.
Taking Still Pictures 1p.30
Checking the SD Memory Card
a
The SD Memory Card is inserted. Images
will be saved on the SD Memory Card.
+
The SD Memory Card is not inserted.
Images will be saved in the built-in memory.
r
The write-protect switch on the SD Memory
Card is in the LOCK position (p.5). Images
cannot be recorded.
Starting-up in Playback Mode
• To switch from playback mode to capture mode, press the Q button or
press the shutter release button halfway.
• In order to set the camera not to start up in playback mode, set [Playback
Mode] to P (Off) from [Startup Shortcut] in the [W Setting] menu.
Playing Back Still Pictures 1p.45
38
3 8
38
Memory status