User's Manual

ManualsBrandsRicoh ManualsElectronicsWireless LAN Module

User’s manual

Product: Wireless LAN Module

Model: LBWB1ZZWU6

FCC ID: BBP-WLALT01

IC: 144D-WLALT01

For OEM integration only – device cannot be sold to general public.

Therefore we will not supply the User’s manual, the installation manual is the official for OEM.

(Note)

This module was granted as FCC/IC Limited Modular Approval. Additional host systems must be required reassessment of Dynamic Frequency Selection

and host systems must provide regulated supply voltages to the module. Separate evaluation must be required for any portable configuration. When used

in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. OEM

integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM

integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be

co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only

those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.

Summary of content (6 pages)

PAGE 1
User’s manual Product: Wireless LAN Module Model: LBWB1ZZWU6 FCC ID: BBP-WLALT01 IC: 144D-WLALT01 For OEM integration only – device cannot be sold to general public. Therefore we will not supply the User’s manual, the installation manual is the official for OEM. (Note) This module was granted as FCC/IC Limited Modular Approval. Additional host systems must be required reassessment of Dynamic Frequency Selection and host systems must provide regulated supply voltages to the module.
PAGE 2
We will ask OEM to include the following Notices required by FCC/ IC on the product and in the User’s manual. ■Requirement of Labeling (For FCC) Please describe the following item on the host device of the this module: Contains Transmitter Module FCC ID: BBP-WLALT01 or Contains FCC ID: BBP-WLALT01 This device complies with part 15 of the FCC Rules.
PAGE 3
■Requirement of User’s Manual Statement (For FCC) User’s manual shall contain following sentence FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
PAGE 4
(For IC) Indicate the following information. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
PAGE 5
indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Original application Antenna type: Chip dielectric antenna Gain: 2.4GHz: -0.5 dBi, W52/53: -0.3dBi, W56: -1.2dBi, W58: -1.7dBi Class II Permissive Change Antenna type: Printed PCB Antenna Gain: 2.4GHz: -1.1 dBi, W52/53: 2.3dBi, W56: 4.5dBi, W58: 2.
PAGE 6
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).