User's Manual
• Confirm that the Gigabit Ethernet board was correctly installed by printing the configuration page. If
it is correctly installed, "Gigabit Ethernet & USB 2.0" will appear for "Device Connection" on the
configuration page.
• If the board was not installed properly, repeat the procedure from step 2. If it cannot be installed
correctly even after reattempting installation, contact your sales or service representative.
• For details about printing the configuration page, see "Test Printing", Quick Installation Guide.
• Before using the Gigabit Ethernet board, you must configure settings from the printer control panel.
For details, see "Ethernet Configuration".
• p.59 "Ethernet Configuration"
Installing the Wireless LAN Interface Board
• Do not touch inside the controller board compartment. Doing so may cause a machine malfunction
or a burn.
• Before beginning work, ground yourself by touching something metal to discharge any static
electricity. Static electricity can damage the unit.
• Do not subject the unit to physical shocks.
1. Check the contents of the package.
BFL301S
2. Turn off the power, and then unplug the power cable.
2. Installing Options
42
2
R-WL54C1N/ R-WL54C1GN
Setting Manual for end product