Service manual

System SP5-xxx
M052/M053/M054 5-82 SM
015
Server URL Path (Primary) DFU
This is used for the scan router program.
016
Server Scheme (Secondary) DFU
This is used for the scan router program.
017
Server Port Number (Secondary) DFU
This is used for the scan router program.
018
Server URL Path (Secondary) DFU
This is used for the scan router program.
022
Rapid Sending Control
Enables or disables the prevention function for the continuous data sending
error.
[0 to 1 / 0 / -]
0: Disable, 1: Enable
5846 [UCS Settings] *CTL -
001
Machine ID (For Delivery Server) Displays ID
Displays the unique device ID in use by the delivery server directory. The
value is only displayed and cannot be changed. This ID is created from the
NIC MAC or IEEE 1394 EUI. The ID is displayed as either 6-byle or 8-byte
binary.
002
Machine ID Clear (For Delivery Server) Clears ID
Clears the unique ID of the device used as the name in the file transfer
directory. Execute this SP if the connection of the device to the delivery
server is unstable. After clearing the ID, the ID will be established again
automatically by cycling the machine off and on.
003
Maximum Entries
[2000 to 20000/ 2000 /1 /step]
Changes the maximum number of entries that UCS can handle.
If a value smaller than the present value is set, the UCS managed data is
cleared, and the data (excluding user code information) is displayed.