Service manual

Bit Switches
SM 51 M381
Fax Option
Type SP5200
(M381)
System Switch 10 [SP No. 1-101-017]
No FUNCTION COMMENTS
0-7
Threshold memory level for
parallel memory transmission
Threshold = N x 128 KB + 256 KB
N can be between 00 - FF(H)
Default setting: 02(H) = 512 KB
System Switch 11 [SP No. 1-101-018]
No FUNCTION COMMENTS
0
TTI printing position
0: Superimposed on the page
data
1: Printed before the data
leading edge
Change this bit to 1 if the TTI overprints
information that the customer considers to be
important (G3 transmissions).
NOTE: If "1" is selected, it is possible that sent
data is printed on two sheets of paper.
1
Not used
Japan Only
2
Not used
Do not change the factory settings.
3
TTI printing type
0: Address unit
1: File unit
TTI printing unit can be selected.
4-6
Not used
Do not change the factory settings.
7
Not used
Japan Only