Innovation in Mobility RDO2700 Series Power Swing Door Operator PRINT Operator Manual 02/14/02 32DDO03.A 1992-02 RICON CORPORATION All Rights Reserved U.S.
This RICON product must be installed and serviced by authorized RICON service technicians. The operator must refer to this manual for operating instructions, and retain it for future reference. Customer Name: Installing Dealer: Date Installed: Serial Number: 32DDO03.
REVISION RECORD REV PAGES 32DDO03. A All DESCRIPTION OF CHANGE New release, in two-book format. END OF LIST ii 32DDO03.
TABLE OF CONTENTS Chapter: I. Page INTRODUCTION................................................................................................1-1 A. RICON ONE-YEAR LIMITED WARRANTY ...................................................... 1-1 B. SHIPMENT INFORMATION ............................................................................. 1-3 C. GENERAL SAFETY PRECAUTIONS ................................................................ 1-3 D. COMPONENT TERMINOLOGY..................................
I. INTRODUCTION T he RICON RDO2700 Series Power Swing Door Operators open and close swing-type van doors. They are designed to operate in most full size vans, and can provide up to 90° of motion for each door. The operators have adjustable linkage that provides exact positioning of each open door. Further adjustment is available at the heavy, splined connection between the operator and its linkage arm. The door operators are installed on the vehicle floor, adjacent to the door hinges.
RICON CORPORATION ONE-YEAR LIMITED WARRANTY Ricon Corporation (Ricon) warrants to original purchaser of this product that Ricon will repair or replace, at its option, any part that fails due to defective material or workmanship as follows: • Repair or replace parts for a period of one year from date of purchase. If You Need to Return a Product: Return this Ricon product to your installing dealer. Please give as much advance notice as possible and allow a reasonable amount of time for repairs.
B. SHIPMENT INFORMATION Ricon does not sell directly to the user because of the specialized nature of this product. The product is distributed through a worldwide network of authorized Ricon service technicians who perform actual installation. ¡ When the product is received, unpack it and check for freight damage. Claims for any damage should be made to freight carrier immediately. ¡ Be sure installation kit contains all items listed on kit packing list.
D. COMPONENT TERMINOLOGY The references used throughout this manual are illustrated in Figure 1-1 and defined in Table 1-1. Refer to the Service Manual, Chapter IV, “Parts and Diagram Lists” for more details. FIGURE 1-1: RDO2700 SERIES POWER SWING DOOR OPERATOR TABLE 1-1: RDO2700 SERIES SWING POWER DOOR OPERATOR TERMINOLOGY REF NAME DESCRIPTION 1 Right motor Opens and closes the right van door. 2 Van doors Doors that are controlled by the swing power door operators.
II. OPERATING INSTRUCTIONS T his chapter contains safety precautions, daily safety check instructions, control and indicator descriptions, and operating instructions for the RICON RDO2700 Series Power Swing Door Operators. This chapter must be read and thoroughly understood by the vehicle operator before attempting to use the power door operators. A. SAFETY PRECAUTIONS ¡ Refer to Figure 2-1.
B. DAILY SAFETY CHECK Inspect the power door operators prior to each use and check that the following conditions are met before operating: ¡ All functions operate properly. If unusual noises or movements exist, DO NOT use and contact an authorized Ricon service technician for repair. ¡ No objects that may interfere with operation are present. ¡ General appearance and lubrication are satisfactory. ¡ All fasteners are tight. C.
2. ELECTRICAL CONTROLS AND INDICATORS The power door operator electrical controls and indicators are on the top of the wheelchair lift electrical cover. For detailed door operator electrical control and indicator descriptions, refer to the appropriate Ricon wheelchair lift or ramp service/owner manual. For overall descriptions of the electrical controls and indicators, refer to the following paragraphs: a. Power Door Operator Circuit Breaker Refer to Figures 2-4 and 2-5.
b. Lift or Ramp Main Circuit Breaker Refer to Figures 2-6 and 2-7. The lift or ramp main circuit breaker is located in the vehicle engine compartment and is designed to interrupt electrical power to the lift or ramp electrical system in case of a short circuit. In the event of a short circuit, the circuit breaker reset tab or button will “pop-down” or “pop-out”. If pressing and releasing the reset tab or button does not reset/ restore power, DO NOT press and hold.
D. POWER DOOR OPERATION WARNING! 1) IMPROPER USE OF THE DOOR OPERATORS CAN RESULT IN PERSONAL INJURY. USERS MUST READ AND FOLLOW THE OPERATING INSTRUCTIONS IN THIS MANUAL. ADDITIONAL COPIES OF THE OPERATOR MANUAL ARE AVAILABLE FROM: RICON CORPORATION 7900 NELSON ROAD PANORAMA CITY, CA 91402 (800) 322-2884 or (818) 267-3100 2) PRIOR TO USE, INSPECT THE DOOR OPERATORS FOR PROPER FUNCTION, REQUIRED MAINTENANCE, OR DAMAGE.
b. c. d. e. 2. LOWER LIFT PLATFORM - Press and hold the UP/DOWN switch in the DOWN position until the platform reaches ground level and the outer rollstop opens completely. Carefully place wheelchair centrally on platform, facing outward, and LOCK WHEELCHAIR BRAKES. Be certain wheelchair is properly positioned on platform and does not contact outer rollstop and prevent it from locking as the platform rises.
III. MAINTENANCE R egular maintenance of the RICON RDO2700 Series Power Swing Door Operator is required to provide optimum performance. During the Ricon warranty period, maintenance inspections must be performed by an authorized Ricon service technician at least once every six months, or sooner depending on usage. After the warranty period, maintenance inspections are recommended for the same time intervals. WARNING ! THIS RICON PRODUCT IS HIGHLY SPECIALIZED.
C. TROUBLESHOOTING GUIDE The troubleshooting guide is designed to provide a logical starting point to locate general problems that could occur with the power door operators. However, not all possible problems or combinations of problems are listed. For troubleshooting the door operators, refer to Table 3-2. The guide does not incorporate routine safety precautions or preliminary procedures and assumes that the vehicle battery is fully charged and the battery terminals/connectors are clean and tight.
TABLE 3-2: TROUBLESHOOTING GUIDE SYMPTOM CLOSE MOTION Only left door closes DOOR OPERATOR SEQUENCE POSSIBLE CAUSE REMEDY Right motor defective. Replace. Ground connection. Clean/repair. Sequence is Actuator arm is installed upside-down. Reverse actuator correct, but arm. open is closed Motors are shipped with brown wire toMotor wires reversed. ward inside of vehicle. END OF TABLE 32DDO03.
D. LIFT DECALS Refer to Figure 3-1. Inspect decals at intervals in Table 3-1. Inspect for chipping, peeling, fading, and illegibility. Order replacement decals by part number given in Figure 3-1, and apply where shown. FIGURE 3-1: DECAL LOCATIONS AND PART NUMBERS 3-4 32DDO03.