Operating instructions

32DDO03.A

2 - 3

2. ELECTRICAL CONTROLS AND INDICATORS

The power door operator electrical controls and indicators are on the top of the wheel-

chair lift electrical cover. For detailed door operator electrical control and indicator de-

scriptions, refer to the appropriate Ricon wheelchair lift or ramp service/owner manual.

For overall descriptions of the electrical controls and indicators, refer to the following

paragraphs:

a. Power Door Operator Circuit Breaker

Refer to Figures 2-4 and 2-5. The circuit breaker for the power door operators is

designed to interrupt electrical power to the door operators in case of a short cir-

cuit. The circuit breaker is either located on the lift Solenoid Bracket or on the top

of the electrical box. In the event of a short circuit, the circuit breaker button will

“pop-up”. If pressing and releasing the button does not reset/restore power, DO

NOT press and hold. Contact an authorized Ricon service technician for repair.

FIGURE 2

4: S

SERIE

S POWER

DOOR OPERATOR CIRCUIT

BREAKER

FIGURE 2

5: UNI

LIT

POWER DOOR OPERATOR

CIRCUIT BREAKER