Operating instructions

32DDO03.A
1 - 4
D. COMPONENT TERMINOLOGY
The references used throughout this manual are illustrated in Figure 1-1 and defined in Table
1-1. Refer to the Service Manual, Chapter IV, “Parts and Diagram Lists” for more details.
TABLE 1-1: RDO2700 SERIES SWING POWER DOOR OPERATOR TERMINOLOGY
REF NAME DESCRIPTION
1 Right motor Opens and closes the right van door.
2 Van doors
Doors that are controlled by the swing power door
operators.
3 Right
4 Left
Reference points from outside the vehicle looking at
the lift inside the vehicle
5 Swinger harness Connects the swing power door operators to the lift.
6 Left motor Opens and closes the left van door.
7 Rod (left and right) Connects van door to actuator arm.
8
Actuator arm (left and
right)
Connects rod to motor.
9 Emergency release pin
Disconnects swing power door operators in the event
of power failure.
10 Inboard
11 Outboard
Reference points from outside the vehicle looking at
the lift inside the vehicle
END OF TABLE
FIGURE 1-1: RDO2700 SERIES POWER SWING DOOR OPERATOR