Service manual

32DDO06.A
2
-
1
II. INSTALLATION
he chapter provides instructions for installing the RICON RDO2900 Series Internal Power Swing Door Operator
into full-size 1992 and later Ford vans, 1990 and later Chevrolet & GMC vans, and 1994 and later Dodge vans.
Custom installations are also possible in other types of vehicles. If a question arises that is not covered in this
manual, or by the Installation Instructions provided with this product, contact Ricon Product Support for assistance.
WARNING!
THIS PRODUCT MUST BE INSTALLED BY A TRAINED, AUTHORIZED RICON SERVICE TECHNICIAN.
NOTE: Installation Instructions specific to the vehicle's make/model are included in the kit supplied with the
power door operators. Refer to Table 2-1 to verify the kit number and the serial number of the operators.
TABLE 2-1: VEHICLE DOOR OPERATOR AND KIT NUMBERS
VEHICLE TYPE DOOR LOCATION OPERATOR MODEL KIT NUMBER
Side RDO2901 01038
1992 & Later Full Size Ford Van
Rear RDO2902 01005
1990 & Later Full Size Chevrolet Van Side RDO2903 01269
1990 & Later Full Size GMC Van Rear RDO2904 01240
Side RDO2905 01307
1994 & Later Full Size Dodge Van
Rear RDO2906 01308
END OF TABLE
NOTE: Refer to Figure 2-1. Verify and record the serial number of this product.
T
FIGURE 2-1: SERIAL NUMBER DECAL LOCATION