Service manual

32DDO06.A
2
-
4
j. Refer to the kit installation instructions and Figure 2-3 or Figure 2-4, as applicable. Position and
fasten the top bracket to the door. Be sure to insert bolt so that the hex-nut is installed behind
the door panel.
k. Refer to the kit installation instructions. Locate bottom bracket down and behind lower door
panel, and fasten bracket to the pane. Be sure to insert attaching bolts so that hex-nuts are in-
stalled behind the door panel.
l. Refer to the kit installation instructions. Position and fasten door operators to the top and bottom
brackets.
NOTE: Position and configuration of mounting brackets will vary slightly with vehicle manufacturer.
m. For right-rear door installation, reinstall the license plate box. The top left-corner screw should
be cut to fit.
FIGURE 2-4: RIGHT-REAR DOOR OPERATOR MOUNTING LOCATIONS
FIGURE 2-3: LEFT-REAR DOOR OPERATOR MOUNTING LOCATIONS