Owner manual

350 S. St. Charles St. Jasper, In. 47546

Ph. 812.482.2932 Fax 812.634.6632

www.ridetech.com

Part # 11150500

65-70 Pontiac Front Black Series Shock Kit

For Use With CoolRide

Components:

2 20000018 Front shocks

2 90000011 Upper shock bracket

2 90001966 Shock sleeve – install in upper eyelet

2 90001619 Cantilever pin

Hardware:

2 99501003 ½” x 2 ½” USS bolt Shock to upper bracket

2 99502001 ½” USS Nylok nut Shock to upper bracket

PAGE 1
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.
PAGE 2
1. The upper shock mount must be welded to the frame. It may need to be cut down to match the stroke of the air spring and suspension. Make sure that when the suspension is fully compressed the shock is about ¼” from being fully compressed. Just tack weld the mount for now and install the lower shock stud and shock. The upper mount will use a 2 ½” x ½” bolt and Nylok nut. Check to make sure the shock does not bottom out when the suspension is fully compressed.