User Manual

350 S. St. Charles St. Jasper, In. 47546

Ph. 812.482.2932 Fax 812.634.6632

www.ridetech.com

Part # 11170500

70-81 Camaro Front Black Series Shock Kit

Components:

2 20000011 Shock absorber – Eye/Stud

2 20000011 Hardware kit

1 90000596 Driver side upper shock mount

1 90000597 Passenger side upper shock mount

2 90001619 Cantilever pin

2 90000471 Aluminum spacer

Hardware:

6 99371004 3/8” x 1 ¼” USS bolt Upper shock mount

6 99372002 3/8” USS Nylok nut Upper shock mount

12 99373003 3/8” SAE flat washer Upper shock mount

PAGE 1
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.
PAGE 2
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Installation Instructions Note: Upper shock bracket must be installed before air springs. 1. The upper shock mount will be bolted to the frame just behind the upper control arm. The large hole in the bracket will align with an equal size hole in the frame. Using the bracket as a template, drill the holes with a 3/8” bit. Make sure the lower tab is against the bottom of the frame.
PAGE 3
4. Bolt the shock to the upper bracket using the supplied bushings and hardware. It will attach to the lower arm using the Cantilever pin supplied.