Manual

350 S. St. Charles St. Jasper, In. 47546

Ph. 812.482.2932 Fax 812.634.6632

www.ridetech.com

Part # 11390500

82-03 S10 Front Black Series Shock Kit

Components:

2 20000011 Shock absorbers – eye stud

2 MON32245 Hardware Kit

2 90001619 Cantilver pin

2 90000471 Aluminum spacer

1 90000422 Driver side upper shock bracket

1 90000423 Passenger side upper shock bracket

Hardware:

6 99371004 3/8” x 1 ¼” USS bolt Upper shock bracket to frame

6 99372002 3/8” Nylok nut Upper shock bracket to frame

12 99373003 3/8” SAE flat washer Upper shock bracket to frame

PAGE 1
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.
PAGE 2
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Installation Instructions 1. The shock bracket must be mounted first. It bolts right behind the upper arm and locates off the large hole in the frame and in the bracket. The brake line bracket must be removed and then reinstalled over the top of the shock bracket. The shock bracket is secured with 1 ¼” x ⅜” bolts with Nylok nuts and flat washers. Note: There is a driver and passenger side bracket.