Manual

350 S. St. Charles St. Jasper, In. 47546

Ph. 812.482.2932 Fax 812.634.6632

www.ridetech.com

Part # 12011099

49-51 Mercury Front CoolRide Kit

Components:

2 90006781 Air spring – 6.5” diameter, double convoluted, ¼” ports

2 90000269 Upper airspring mounts (4” tall)

2 90000270 Lower airspring mounts (2” tall angled)

Hardware:

2 99435002 7/16-14 x 8” stud upper airspring mount

6 99433002 7/16 sae flat washers upper airspring mount, lower shock mount

6 99432001 7/16 nyloc nuts upper airspring mounting stud, lower shock mount

4 99431002 7/16 x 1 ¼” uss bolts lower shock mounts

4 99372002 3/8 uss nyloc nuts upper airspring

6 99373003 3/8 sae flat washers airspring mounting

2 99371001 3/8 x 3/4 uss bolts lower airspring mounting

2 99373005 3/8 lock washers lower airspring mounting

PAGE 1
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Part # 12011099 49-51 Mercury Front CoolRide Kit Components: 2 90006781 Air spring – 6.
PAGE 2
This system is compatible with either stock or dropped spindles 1. Raise and support vehicle at a safe comfortable working level. 2. Remove coilspring. Refer to service manual for proper and safe procedure. 3. Assemble airspring onto its mounts. The tall cup is the top. The short angled cup goes into the lower control arm with the tall part of the angle toward the spindle. This will properly align the airspring when the vehicle is a ride height.