User guide

350 S. St. Charles St. Jasper, In. 47546

Ph. 812.482.2932 Fax 812.634.6632

www.ridetech.com

Part # 19002003

2000lb Air Spring Kit – Side Frame Upper / Weld On Lower

Components:

2 90007076 Rolling sleeve air spring

2 90000001 Weld-on axle bracket

2 90000002 Bolt-on upper bracket

2 31952201 1/8” npt x ¼” tube 90 degree air line fitting

Hardware:

8 99371004 3/8” x 1 1/4” USS bolt Upper bracket to frame

8 99372002 3/8” USS Nylok nut Upper bracket to frame

2 99371003 3/8” x 1” USS bolt Air spring to lower bracket

2 99373005 3/8” lock washer Air spring to lower bracket

10 99373003 3/8” SAE flat washer Air spring mounting

2 99752004 3/4” SAE jam nut Air spring to upper bracket

PAGE 1
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.
PAGE 2
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com AIR RIDE INSTALLATION ON REARENDS [using weld-on brackets] 1. Set rear of vehicle at ride height. You may have to remove the coilsprings or some of the leafs to let the vehicle settle to the desired ride height. Remember that this is the height that you want the car to go down the road at. You will have approx. 4” of drop available from this point.
PAGE 3
Pro Street lower bracket / under-frame bracket: The “Pro street” lower bracket is designed to drop the airspring 4” below the axle tube. This will accommodate a rear suspension that is very compact [such as a pro street vehicle] or that requires that the airspring be below the frame rail. This bracket also incorporates the lower 4-link mount and/or the lower shock mount. The upper mount is often best located under the frame rail.