Use and Care Manual

Part To do Before/after
each use
10
hours
25
hours
50
hours /
half
year
100
hours /
once a
year
Spark
plug
check
x
Spark
plug
clean
x
Spark
plug
replace
whenever necessary
Air filter check x
Air filter clean x
Air filter replace whenever necessary
Saw
chain
check
x
Saw
chain
lubricate
x
Saw
chain
clean
x
Saw
chain
replace
whenever necessary
3. Sprocket wheel
NOTE: It is not necessary to remove the saw chain (7) to lubricate
the sprocket. Lubrication can be done on the job.
1. Clean the sprocket wheel (8b).
2. Using a disposable lube gun, insert the needle nose into the lubrication hole
(8a) and inject grease until it appears at the outside edge of the sprocket (Fig.
43).
47
For Customer Service:
Please call 877-713-3189 (Toll Free), or email: [e-mail]