Brochure

800.769.7743
RIDGID.COM/DRUMS
23
DRAIN CLEANING
DRUM MACHINES
K-6200 DRUM MACHINE
CLEAR 3" TO 6" (76 TO 152 MM) DRAIN AND SEWER LINES
The RIDGID
®
K-6200 has a low center of gravity and custom kickstand to stabilize the
machine during operation while the smaller footprint makes getting in and out of tight
work spaces easier. Direct drive design means the 600 W universal motor and gearbox
bear down as torque builds and its cable control system causes the drum to stop spinning
when the blade becomes lodged in a blockage to minimize the potential for cable flip.
‣
CABLE CONTROL SYSTEM
The drum stops spinning when the blade is lodged in a blockage to prevent cable flip
‣
DIRECT DRIVE DESIGN
Audible warnings let operator know when the blockage is encountered
No drum adjustments necessary to stay aligned and tight on the drive shaft
‣
AUTOFEED
®
INCLUDED
Comes standard with AUTOFEED control, toolbox and selection of cutters
CATALOG
NO.
MODEL
NO.
DESCRIPTION
95737 K-6200
Machine with
55
⁄
88
" (16 mm) Pigtail
95732
K-6200 with
C-24
Machine, Standard Accessories and
55
⁄
88
" × 100'
(16 mm × 30 m) Inner Core Cable
93557
K-6200 with
C-24 HD Cable
Machine, Standard Accessories and
55
⁄
88
" × 100'
(16 mm × 30 m) HD Solid Core Cable
K-7500 DRUM MACHINE
CLEARS 3" TO 10" (76 TO 254 MM) DRAIN LINES
The RIDGID K-7500 drum machine is the definition of heavy-duty. Its powerful – yet surprisingly
quiet – 600 W universal motor spins cables at 200 RPM making it an ideal solution for tough
obstructions like roots. Narrow enough to fit through bathroom doors, the K-7500 also features
a two-position stair climber and adjustable handles for ease of transport and loading.
‣
CABLE CONTROL
Inner-drum and ball bearing distributor arm work in tandem
with motor and gearbox system to reduce cable flip inside the drum
‣
AUTOFEED
Grease fittings and an open design make for easy maintenance
AUTOFEED advances and retrieves cable up to 22' (6.7 m) per minute
‣
TRANSPORT ASSIST
Two-position stair climber eliminates extra cost for loading wheels
CATALOG
NO.
MODEL
NO.
DESCRIPTION
59562 K-7500 Machine with ¾" (19 mm) Pigtail and Standard Accessories
60052 K-7500 C-100
Machine, Standard Accessories, and ¾" × 100'
(19 mm × 30 m) Inner Core Cable.
60062
K-7500
w/C-75
Machine, Standard Accessories, and
33
/
44
" × 75'
(19 mm × 23 m) Inner Core Cable.
61102 K-7500
Machine with
55
⁄
88
" (16 mm) Pigtail and Standard Accessories