Brochure

DIAGNOSTICS
UTILITY LOCATING
RIDGID
®
SEEKTECH
®
ST-305
AND ST-305R TRANSMITTERS
The RIDGID SeekTech ST-305 and ST-305R are compact yet powerful multi-frequency transmitters.
They can be used with any RIDGID SeekTech or NaviTrack
®
receiver to find buried conductors such
as pipes, cables, and wires.
‣
THREE OPERATING MODES
Apply a signal onto a buried conductor directly using the metallic leads, inductively with the
internal antenna, or with the optional SeekTech Inductive Clamp accessory
‣
MULTIPLE FREQUENCY OUTPUT OPTIONS
Low, medium, and high frequencies from 1 to 262 kHz are available
‣
FULL RECEIVER COMPATIBILITY
Designed for use with any SeekTech or NaviTrack receiver to trace and mark the positions
of buried pipes and cables
ST-305
ST-305R
RIDGID SEEKTECH
INDUCTIVE SIGNAL CLAMP
ACCESSORY
COMPATIBLE WITH ALL RIDGID TRANSMITTERS
The RIDGID SeekTech inductive signal clamp lets you apply a signal to a cable or pipe
when direct connection is not possible.
CATALOG
NO.
DESCRIPTION
21898 SeekTech ST-305 Transmitter (5 W)
50793R SeekTech ST-305R Transmitter (5 W; 18 V Compatible)
66933 SeekTech ST-305R System with Battery and Charger
CATALOG
NO.
DESCRIPTION
20973 SeekTech 4" (100 mm) Inductive Clamp
800.769.7743
RIDGID.COM/LOCATING
81
RIDGID NAVITRACK
BATTERY SONDE
MEETS FCC CLASS B AND EN 55022
CLASS B REQUIREMENTS
The RIDGID remote transmitter attaches to a drain cleaning cable or water jetter hose for
in-line locating. It features a 512 Hz signal and flashing LED lights that indicate that the
sonde is transmitting.
CATALOG
NO.
DESCRIPTION
16728 NaviTrack Battery Sonde, 512 – AAA
With its battery shoe, the ST-305R can be powered by a Li-Ion 18 V
rechargeable battery or six alkaline or NiMH C-cell batteries.