Accessory List

ManualsBrandsRIDGID ManualsPlumbing ProductC10 7/8 in. x 10 ft. Cable

K9-306 MACHINE

CATALOG NO.

66618 66623 66628

66633

66638 66643 66648 66653 66658

DESCRIPTION

K9-306

3" CARBIDE

K9-306

4" CARBIDE

K9-306

6" CARBIDE

K9-306 - 3"

PENETRATING

HEAD

K9-306 - 4"

PENETRATING

HEAD

K9-306 - 6"

PENETRATING

HEAD

PIPE SIZE

3"- 4"

(76-102 mm)

4"-5"

(102-127 mm)

5"- 6"

(127-152 mm)

3"- 4"

(76-102 mm)

4"-5"

(102-127 mm)

5"- 6"

(127-152 mm)

3"- 4"

(76-102 mm)

4"-5"

(102- 127 mm)

5"- 6"

(127-152 mm)

COPPER

GALVANIZED

CAST IRON

PVC

ABS

ORANGEBURG

CORRUGATED

CLAY

GREASE

SOFT

BLOCKAGE

SCALING

ROOTS

WIPES

INCLUDED

WITH KIT

BLOCKAGE

PIPE TYPE

K9-306 MACHINE

FIND THE RIGHT CHAIN KNOCKER FOR

THE JOB TO GET WALL-TO-WALL CLEAN

Use the table below for recommended options based on blockage, pipe size and pipe type.

Any chain knocker can be purchased separately.

and other countries. All other trademarks belong to their respective holders. Drill not included.

Chain Knockers Carbide Tipped Chain Knockers

Penetrating Head

Chain Knockers

Summary of content (4 pages)

PAGE 1
FIND THE RIGHT CHAIN KNOCKER FOR THE JOB TO GET WALL-TO-WALL CLEAN Use the table below for recommended options based on blockage, pipe size and pipe type. K9-306 MACHINE K9-306 MACHINE Chain Knockers Penetrating Head Chain Knockers Carbide Tipped Chain Knockers CATALOG NO.
PAGE 2
K9-204 MACHINE K9-102 MACHINE Chain Knockers Carbide Tipped Chain Knockers K9-102 MACHINE K9-204 MACHINE Penetrating Head Chain Knockers Chain Knockers CATALOG NO.
PAGE 3
SET UP FOR SUCCESS A QUICK GUIDE FOR PROPER DRILL SETUP AND CLEANING Read and follow all warnings and instructions for all equipment and materials used with these machines. 1 THE RIGHT TOOL FOR THE JOB FlexShaft machines require a cordless drill equipped with an adjustable clutch and a speed range between 1800 and 2500 RPM. Do not use with an impact driver or corded drill. 2 DIAL UP THE SPEED 4 1 Set your drill to the highest speed – typically setting “2” or “3” is optimal.
PAGE 4
FIND THE RIGHT BRUSH TO CLEAN AND PREPARE DRAINS WALL TO WALL K9-102 MACHINE K9-204 MACHINE K9-306 MACHINE Nylon Brush Nylon and Steel Brush APPLICATION Nylon material for gentle cleaning of fragile pipes Suitable as a centering guide for other tools Suitable for spreading resin when spray lining K9-102 FLEXSHAFT MODEL K9-204 Nylon – Steel material for cleaning & light grinding Suitable for relining preparation of PVC & cast iron pipes K9-306 K9-204 K9-306 CATALOG NO.