Overview of Primary Product

The NEW RIDGID

StrutSlayr is the latest accessory that makes the

world’s most popular press tool even more valuable. StrutSlayr attaches

to RIDGID

32kN press tools to deliver a fab shop quality, burr-free cut

in 5 seconds or less. Minimal sparking versus grinders and chop saws –

just a clean, consistent cut with a pull of a trigger.

• Fab Shop Quality: Burr-free cuts eliminate the need for extra filing

• Increased Efficiency: Clean, consistent cuts in 5 seconds or less

• Safe Operation: Minimal sparking versus grinders and chop saws

• Portable: Easy to move around the job site and mounts to RIDGID TRISTANDs

• Built-in Measuring Guide: allows accuracy of cut on job site

Strut Shear Head

PAGE 1
Strut Shear Head The NEW RIDGID® StrutSlayr is the latest accessory that makes the world’s most popular press tool even more valuable. StrutSlayr attaches to RIDGID® 32kN press tools to deliver a fab shop quality, burr-free cut in 5 seconds or less. Minimal sparking versus grinders and chop saws – just a clean, consistent cut with a pull of a trigger.
PAGE 2
SPECIFICATIONS • Cutting Capability......... Up to 12ga 15/8" x 15/8" (41mm x 41mm x 2.5mm) or 15/8" x 13/16" (41mm x 21mm x 2.5mm) strut channel to the MFMA-4 Standard. Not for use with Stainless Steel strut. • Weight of Head............. 13 lbs. (5.8 kg) (including dies, not including press tool) • Press Tool Compatibility................. RIDGID® Standard Series 32kN Press Tools (Such as the RP340 and RP330). Not for use with RIDGID 320-E and CT-400 Press Tools. • Cut Squareness............