User Guide

800.769.7743 l RIDGID.com
21
HOOK AUGER
For heavy and dense root stoppages in
pipes that require hooking and breaking up.
DROP HEAD AUGER
For cleaning back to back mounted
fixtures e.g., sinks where cable needs
to be led into down pipe.
STRAIGHT AUGER
For use in exploring and breaking up
stoppages or returning sample to
surface to determine correct tool.
FUNNEL AUGER
For use as second tool in line. Breaks
up remains of stoppage left by straight
auger.
RETRIEVING AUGER
For searching for cable which is broken
or lost in line.
GREASE CUTTER
For lines which have become badly
greased with detergents and have to be
opened.
SPADE CUTTER
For following up after augers have been
used and to open up floor drains.
FOUR BLADE SAW TOOTH CUTTER
For blockages caused by hardened,
glazed material such as chemical
deposits.
GREASE “C” CUTTER
For grease blockage in lines leading from
garbage disposal unit or waste pipe.
EXPANDING FINISH CUTTERS
For final removal of material adhering to
walls and certain roots of fibrous nature.
CHAIN KNOCKER
For use when vigorous action is required
for cleaning of scale in pipes and boiler
tubes.
FLUE BRUSH
For use for finish cleaning required of
boiler tubes and heat exchangers.
SPIRAL BAR CUTTER
For main sewers blocked by roots, leaf
debris, sticks, sawdust, cloth, and
sacking.
SPIRAL SAW TOOTH CUTTER
For clearing any stoppage, roots, rags,
sticks, etc.
SAW TOOTH CUTTER
For cleaning lines blocked heavily with
roots. Unique design permits cutter to
be removed from damaged pipe without
locking.
SHARKTOOTH CUTTER
For use in cleaning pipes of general
material clinging to pipe walls.