OPERATOR’S MANUAL 1/4 SHEET SANDER DOUBLE INSULATED R2500 Your 1/4 sheet sander has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank you for buying a RIDGID product.
TABLE OF CONTENTS n Introduction ...................................................................................................................................................................... 2 n General Safety Rules .....................................................................................................................................................3-4 n Specific Safety Rules...............................................................................................................
GENERAL SAFETY RULES WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS WORK AREA n Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. n Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
GENERAL SAFETY RULES SERVICE n Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel may result in a risk of injury. n When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock or injury.
SYMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.
SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.
ELECTRICAL DOUBLE INSULATION EXTENSION CORDS Double insulation is a concept in safety in electric power tools, which eliminates the need for the usual three-wire grounded power cord. All exposed metal parts are isolated from the internal metal motor components with protecting insulation. Double insulated tools do not need to be grounded. When using a power tool at a considerable distance from a power source, be sure to use an extension cord that has the capacity to handle the current the tool will draw.
FEATURES PRODUCT SPECIFICATIONS Size of Paper ........................................................................................................................................................... 1/4 sheet Motion ............................................................................................................................................................... Orbital Action Orbit Diameter .......................................................................................................
FEATURES KNOW YOUR RANDOM ORBIT SANDER ON-BOARD VACUUM ADAPTOR See Figure 1. Before attempting to use this product, familiarize yourself with all operating features and safety rules. The built-in vacuum adaptors allow you to connect to a vacuum hose to help keep the work area clean. SWITCH The 12-foot cord has a built-in cord wrap. This tool is equipped with a simple switch control.
OPERATION WARNING: Do not allow familiarity with tools to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury. PAPER CLAMP (UNLOCKED) WARNING: Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury. NON-ADHESIVE SANDPAPER LEVER SANDING PAD TAB ADHESIVE SANDPAPER WARNING: Fig.
OPERATION PAPER PUNCH See Figure 3. A paper punch template has been supplied with the sander for aligning and punching holes in sandpaper. The punched holes must align with the holes in the sander cushion. n Install sandpaper on the sander. n Align sander cushion over the paper punch. n Push down on sander. SANDPAPER SELECTION Selecting the correct size grit and type sandpaper is an extremely important step in achieving a high quality sanded finish.
OPERATION PREPARING FOR OPERATION CAUTION: Be careful not to let your hand completely cover air vents. SANDING See Figure 5. Clamp or otherwise secure the work to prevent it from moving under the sander. WARNING: Unsecured work could be thrown towards the operator causing injury. Hold the sander in front and away from you, keeping it clear of the workpiece. Start the sander by pressing the switch button to “ON” position and letting the motor build to its maximum speed.
OPERATION DUST REMOVAL SANDING The dust bag located on the rear of the sander provides a dust collection system for the sander. Sanding dust is drawn up through the holes of the cushion and collects in the dust bag during sanding operation. For more efficient operation, empty dust bag frequently. WARNING: Collected sanding dust from sanding surface coatings such as polyurethanes, linseed oil, etc. can self-ignite in the sander dust bag or elsewhere and cause fire.
MAINTENANCE BRUSH REPLACEMENT WARNING: See Figure 9. n Unplug the sander. When servicing use only identical RIDGID® replacement parts. Use of any other parts may create a hazard or cause product damage. WARNING: Failure to unplug the tool could result in accidental starting causing possible serious injury. WARNING: The sander should never be connected to a power supply when you are assembling parts, making adjustments, cleaning, performing maintenance, or when the tool is not in use.
WARRANTY RIDGID® HAND HELD AND STATIONARY POWER TOOL 3 YEAR LIMITED SERVICE WARRANTY Proof of purchase must be presented when requesting warranty service. Limited to RIDGID hand held and stationary power tools purchased 2/1/04 and after. This product is manufactured by One World Technologies, Inc. The trademark is licensed from RIDGID, Inc. All warranty communications should be directed to One World Technologies, Inc.
OPERATOR’S MANUAL 1/4 SHEET SANDER DOUBLE INSULATED R2500 Customer Service Information For parts or service, contact your nearest RIDGID authorized service center. Be sure to provide all relevant information when you call or visit. For the location of the authorized service center nearest you, please call 1-866-539-1710 or visit us online at www.ridgid.com. The model number of this tool is found on a plate attached to the motor housing. Please record the serial number in the space provided below.
