Use and Care Manual

14 – English
TROUBLESHOOTING
ILLUSTRATIONS START ON PAGE 15
AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.
PROBLEM POSSIBLE CAUSE SOLUTION
Air leak near the top of the tool
or in the trigger area
Inadequate lubrication
Loose screws
Worn or damaged O-rings or seals
Lubricate tool
Tighten screws
Install Overhaul Kit
Air leak near the bottom of the tool Inadequate lubrication
Loose screws
Worn or damaged O-rings or bumper
Lubricate tool
Tighten screws
Install Overhaul Kit
Tool does nothing or
operates sluggishly
Inadequate air supply
Inadequate lubrication
Worn or damaged O-rings or bumper
Verify adequate air supply
Lubricate tool
Install Overhaul Kit
Tool jams frequently Incorrect fasteners
Damaged fasteners
Loose magazine
Dirty magazine
Worn or damaged driver
Verify that fasteners are the correct
size
Replace fasteners
Tighten screws
Clean magazine
Install Driver Maintenance Kit
This product has a 90-Day Satisfaction Guarantee Policy, as well as a
Three-year Limited Warranty.
For Warranty and Policy details, please go to www.RIDGID.com
or call (toll free) 1-866-539-1710.