Use and Care Manual

19 - English
ASSEMBLY
Fig. 20
INDICATOR
SCREW
SCALE
INDICATOR
MITER
SCALE
Fig. 21
SCALE
INDICATOR
SCALE
INDICATOR
INDICATOR
SCREW
BEVEL
SCALE
33.9
33.9
22.5
22.5
SOCKET
HEAD
SCREW
SOCKET
HEAD
SCREW
FENCE
Fig. 19
SLIDING
MITER
FENCE
FENCE
Fig. 18
DETENT
RELEASE
BUTTON
FENCE
SCREW
SLIDING
MITER
FENCE
 Turn the fence screws counter clockwise 2-3 times to
loosen and slide miter fences toward the saw arm until
they are flush with the miter table.
 Remove the sliding miter fences by pulling them up and
away from the miter table.
 Using the blade wrench, loosen the socket head screws
that secure the fence to the miter table. See figure 19.
 Rotate the fence left or right until the saw blade is parallel
with the square.
 Retighten the screws securely. Check blade squareness
to fence and readjust if necessary.
 Replace the sliding miter fences.
Your saw has several scale indicators. After squaring
adjustments have been made, it may be necessary to loosen
the indicator screws and reset them to zero. See Figures
20 - 21.