Use and Care Manual

ManualsBrandsRIDGID ManualsMiter Saws15 Amp 10 in. Sliding Miter Saw with Universal Mobile Miter Saw Stand and Mounting Braces

12 - English

Fig. 5

SLIDING

MITER FENCE

SLIDE

BAR

LOWER BLADE

GUARD

FEATURES

EXTENDED MITER CAPACITY

Rotating extension tables allow for miter cuts up to 70°.

HEAD LOCK PIN

See Figure 4.

The head lock pin is used for locking the saw arm in the

down position.

LED LIGHTING SYSTEM

The LED casts a shadow of the blade teeth onto the

workpiece for making precision cuts and predicts blade kerf

for blade cut line.

MITER DETENT OVERRIDE LEVER

See Figure 5.

The miter detent override lever allows you to make adjust-

ments to the miter angle without holding the miter detent

button. To use the miter detent override lever, unlock the

miter lock lever, push the miter detent bypass button (1) and

move the miter detent override lever down (2) to engage the

override.

MITER SCALE

Indexed miter stops have been provided at 0°, 15°, 22.5°,

31.6°, 45°, 60°, and 67.5°. The 0°, 15°, 22.5°, 31.6°, 45°, 60°,

and 67.5° indexed miter stops have been provided on both

the left and right side of the miter table.

SELF-RETRACTING LOWER BLADE GUARD

See Figure 5.

The lower blade guard is made of shock-resistant plastic that

provides protection from each side of the blade. It retracts

over the upper blade guard as the saw is lowered into the

workpiece.

SLIDE BAR

When unlocked, the saw arm will glide forward and back-

ward the length of the slide bar for cutting various workpiece

widths.

SLIDE LOCK KNOB

See Figure 5.

The slide lock knob locks and unlocks the sliding feature

of this tool.

SLIDE

LOCK

KNOB