Use and Care Manual

19
ADJUSTMENTS
Figure 19
A
THROAT PLATE
See Figures 19.
ONLY use RIDGID® authorized service parts.
Using non-authorized parts can results in damage to your
machine and serious personal injury.
In the event that your throat plate needs to be replaced for
any reason, follow these instruction.
1. Loosen the fence lock knobs. Slide both fences away
from center.
2. Remove the six screws
A
which hold the throat plate.
Lift the throat plate o the work table.
3. Replace the throat plate only using a RIDGID®
authorized service part.
4. Tighten the six screws
A
which hold the throat plate.