Use and Care Manual

8 - English
MAINTENANCE
WARNING:
When servicing use only identical replacement
parts. Use of any other parts can create a hazard
or cause product damage.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
BITS
Get faster and more accurate cutting results by keeping bits
clean. Remove all accumulated build-up from bits after each
use. Replace bits when they become dull.
NOTE: ILLUSTRATIONS START ON PAGE 9
AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.
This product has a 90-Day Satisfaction Guarantee Policy, as well as a
Three-year Limited Warranty. For Warranty and Policy details, please go to
www.RIDGID.com or call (toll free) 1-866-539-1710.
CAUTION :
The bit flutes are sharp and should be handled
with caution.
COLLET
Over time it may become necessary to clean the collet and
collet nut. To do so, simply remove collet nut and collet from
the shaft and clean the dust and chips that have collected.
Then return collet nut to its original position. Tighten collet
nut on collet without a bit installed.