Use and Care Manual
12 - English
Look for these accessories where you purchased this product:
Edge Guide ........................................................................................................................................................202050004
WARNING:
Current attachments and accessories available for use with this tool are listed above. Do not use any attachments
or accessories not recommended by the manufacturer of this tool. The use of attachments or accessories not
recommended can result in serious personal injury.
ACCESSORIES
MAINTENANCE
ILLUSTRATIONS START ON PAGE 13 AFTER FRENCH AND
SPANISH LANGUAGE SECTIONS.
This product has a 90-day satisfaction guarantee policy, as well as a
three-year limited warranty. For warranty and policy details, please go to
www.RIDGID.com or call (toll free) 1-866-539-1710.
WARNING:
When servicing, use only identical replacement
parts. Use of any other parts may create a hazard
or cause product damage.
WARNING:
Always wear eye protection with side shields
marked to comply with ANSI Z87.1. Failure to do
so could result in objects being thrown into your
eyes resulting in possible serious injury.
WARNING:
To avoid serious personal injury, always remove the
battery pack from the product when cleaning or
performing any maintenance.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
Do not at any time let brake fluids, gasoline,
petroleum-based products, penetrating oils, etc.,
come in contact with plastic parts. Chemicals can
damage, weaken or destroy plastic which may
result in serious personal injury.
ADJUSTMENTS
To adjust positive 0° bevel stop:
Remove the battery pack.
Rotate the bevel lock lever counterclockwise to release.
Insert a 2.5 mm hex key (not provided) through the screw
hole in the saw base.
Turn adjustment screw and adjust base until it is square
with the saw blade.
Securely lock the bevel lock lever.
WARNING:
Attempting a bevel cut without having the bevel
lock lever securely locked in place can result in
serious injury.