Owner's Manual

8
ASSEMBLY
Extension Wand
Release Button
Accessory Nozzle
Ridges
CONNECT:
Locking Accessories
1. To Connect Accessory: Your
RIDGID Wet/Dry Vac includes Locking
Accessories to prevent the Accessories
from falling off when in use. To
connect the Accessories, align the
Nozzle Ridges of the Accessory with
the Release Button of your Extension
Wand. Press to secure the Nozzle to
the Extension Wand.
2. To Disconnect Accessory: Twist
the Nozzle and Extension Wand to
disengage the Nozzle Ridges and pull.
You may also press the Release Button
and pull to disengage.
Accessory Nozzle
Ridges
Extension Wand
Release Button
DISCONNECT:
Inserting the Professional
Locking Hose
1. Locate the end of the Professional
Locking Hose and align it with the Drum
Inlet. Align the Hose Release Button with
the Ridges on the Vac Inlet. Push the
Hose end straight into the Vac Inlet until
the Hose Release Button fully engages
the Inlet Ridges.
2. To remove Hose, rotate the end of the
Professional Locking Hose in
either direction to release the
Hose Latch from the Inlet Ridges.
Press the Hose Release Button and
pull the Hose end straight out of the
Vac Inlet.
Drum
Vac Inlet
Ridges
Professional
Locking Hose
Hose
Release Button
SP7054 RT12000.indb 8 9/5/18 12:04 PM