OPERATOR’S MANUAL 18 VOLT CORDLESS WORKLIGHT R849 Your worklight has been engineered and manufactured to our high standards for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank you for buying a RIDGID product.
TABLE OF CONTENTS Introduction .....................................................................................................................................................................2 General Safety Rules .......................................................................................................................................................3 Specific Safety Rules ................................................................................................................
SPECIFIC SAFETY RULES any cordless product in the presence of open flame. An exploded battery can propel debris and chemicals. If exposed, flush with water immediately. Know your worklight. Read operator’s manual carefully. Learn its applications and limitations, as well as the specific potential hazards related to this worklight. Following this rule will reduce the risk of electric shock, fire, or serious injury.
SAFETY RULES FOR CHARGER Do not let gasoline, oils, petroleum-based products, etc. come in contact with plastic parts. They contain chemicals that can damage, weaken, or destroy plastic. An extension cord should not be used unless absolutely necessary. Use of improper extension cord could result in a risk of fire and electric shock. If extension cord must be used, make sure: WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS.
SYMBOLS Some of the following symbols may be used on this worklight. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the worklight better and safer.
SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.
FEATURES PRODUCT SPECIFICATIONS Battery .....................................................................................................................................................................18 Volt DC Charger Input ........................................................................................................................................ 120 V, 60 Hz, AC only 180° ROTATING HEAD BEAM ADJUSTMENT RING SWITCH TRIGGER LATCHES BATTERY PACK Fig.
ASSEMBLY UNPACKING WARNING: This product has been shipped completely assembled. If any parts are missing do not operate this worklight until the missing parts are replaced. Failure to do so could result in possible serious personal injury. Carefully remove the worklight and any accessories from the box. Make sure that all items listed in the packing list are included. Inspect the worklight carefully to make sure no breakage or damage occurred during shipping.
OPERATION BATTERY PACK WARNING: Do not allow familiarity with worklights to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING: Do not use any attachments or accessories not recommended by the manufacturer of this worklight. The use of attachments or accessories not recommended can result in serious personal injury.
OPERATION LED FUNCTION OF CHARGER See Figure 3. LED INDICATOR BATTERY PACK RED LED GREEN LED ACTION Power Without battery pack ON OFF Ready to charge battery pack Evaluate Hot battery pack Flashing OFF When battery pack reaches cooled temperature, charger begins fast charge mode. Evaluate Cold battery pack Flashing OFF When battery pack reaches warmed temperature, charger begins fast charge mode.
OPERATION TO TURN WORKLIGHT ON/OFF TO INSTALL BATTERY PACK See Figure 4. Align the raised rib on the battery with the groove inside flashlight base. See Figure 5. To turn worklight ON or OFF, depress switch trigger located beneath handle. Slide together until latches click. TO CHANGE BEAM DIRECTION See Figure 5. Rotate worklight head up to 180˚ to change direction of light beam.
MAINTENANCE BULB REPLACEMENT WARNING: See Figure 6. When purchasing replacement bulb, request recommended part number 780204001. When servicing use only identical RIDGID replacement parts. Use of any other parts may create a hazard or cause product damage. TO REPLACE BULB: Allow bulb to cool. � Remove battery pack from worklight. � Twist lens cover in a counter-clockwise direction and remove. � Twist old bulb until silver triangle and triangle-shaped notch are aligned, then pull to remove.
MAINTENANCE BATTERY PACK REMOVAL AND PREPARATION FOR RECYCLING BATTERIES The battery pack for this worklight is equipped with nickelcadmium rechargeable batteries. Length of service from each charging will depend on the type of work you are doing. To preserve natural resources, please recycle or dispose of batteries properly. The batteries in the battery pack have been designed to provide maximum trouble-free life. However, like all batteries, they will eventually wear out.
NOTES 14
WARRANTY RIDGID® HAND HELD AND STATIONARY POWER TOOL 3 YEAR LIMITED SERVICE WARRANTY WHAT IS NOT COVERED Proof of purchase must be presented when requesting warranty service. This warranty applies only to the original purchaser at retail and may not be transferred.
OPERATOR’S MANUAL 18 VOLT CORDLESS WORKLIGHT R849 Customer Service Information: For parts or service, contact your nearest RIDGID authorized service center. Be sure to provide all relevant information when you call or visit. For the location of the authorized service center nearest you, please call 1-866-539-1710 or visit us online at www.ridgid.com. The model number of this worklight is found on a plate attached to the base of the worklight. Please record the serial number in the space provided below.