User guide

MULTICOM 382
MULTICOM 372
MULTICOM 362
56
Serial / USB port
Serial / ESD port
MultiCOM 372 provides a UPS with an additional RS232
serial interface port. The card has Emergency Power Off
(EPO) and Remote Shut Down (RSD) inputs with terminal
connections.
CHARACTERISTICS
• EPO and UPS shutdown interface
• 12Vdc 80mA contact option.
MultiCOM 382 provides a set of relay contacts to provide
UPS alarm and status indication.
The contacts are connected through terminal connections.
Signal contacts include Emergency Power Off (EPO),
Remote Shut Down (RSD), On Battery, On Bypass,
Alarm and Low battery. The contacts are change over or
normally open.
CHARACTERISTICS
• max. 3A current at 250Vac
• signal contact customisation.
Contacts / ESD board
MultiCOM 362 provides a UPS with an additional RS232
serial interface or USB port. The USB port allows the UPS
to communicate with Apple Macintosh computers as
well as Windows and Linux operating systems.
CHARACTERISTICS
• compatible with USB 1 or 2
• compatible with PowerShield².
Software and Accessories