User`s manual

Current Status Function (Press button and
release it in 2 seconds)
Function (Press button and hold it
for 3 seconds minimum)
Normal Operation、Hush State、Low
Battery
Test Local Hush
Local Alarm
Locate All Hush
Remote Alarm
Locate All Hush
Locate Alarm
None Local Hush
Malfunction
Reset None
Function Definition as below:
Test: This function can simulate the alarm signal, and lead the device to Local Alarm Status (refer to TABLE2). The
simulated alarm signal will disappear after 15 seconds.
Locate： This function can lead the device to Locate Alarm Status (refer to TABLE2).
Local Hush： This function can lead the device to Hush Status (refer to TABLE2).（Only to the device）
All Hush： This function can lead all the devices which are in the same ID to Hush Status (refer to TABLE2).
Reset: Reset the device
TESTING THIS ALARM
WARNING!
z Test the CO Alarm once a week. If the CO Alarm ever fails to test correctly, have it replaced immediately! If the CO
Alarm is not working properly, it cannot alert you to a problem.
z DO NOT stand close to the Alarm when the horn is sounding. Exposure at close range may be harmful to your
hearing. When testing, step away when horn starts sounding.
Press the test button and release it in 2 seconds， The alarm horn
will
sound 4 beeps, a pause, then 4 beeps. The ALARM (RED) light will flash. The
other devices in same ID should sound a loud beep in 8 seconds. The alarm will
stop sounding after 15s.
The alarm sequence should last 15 seconds. If it does not alarm, make sure
fresh batteries are correctly installed, and test it again. If the unit still does not
alarm, replace it immediately.
If the alarm does not test properly:
1. Make sure that fresh batteries are installed correctly.
2. Be sure the Alarm is clean and dust-free.
3. Install fresh 9V batteries* and test the Alarm again.
*For a list of acceptable replacement batteries, see “Regular Maintenance.”
WARNING!
The Test/Silence button is the only proper way to test the CO Alarm. NEVER use vehicle exhaust! Exhaust may cause
permanent damage and voids your warranty.
HUSH FEATURE