Users Manual
RECORD PLAYER | 11
OPERATING INSTRUCTIONS
RCA Jack
The RCA Jack connects directly to a pair of active/powered speakers or the appropriate input for a stereo system. To connect the
RCA Jack, make sure the red plug is connected to the right channel and the white plug is connected to the left channel.
Note: The RCA Jack is not designed to be connected directly to the passive/underpowered speakers. If connected to the passive
speakers, the volume level will be very low.
Bluetooth Output : Connecting to Bluetooth Speakers
Make sure the distance between the turntable and Bluetooth speakers is not more than 33 ft (10 meter).
1. Press and hold the Volume Knob (11) for 2 or 3 seconds to turn the unit on.
2. Press and hold the Mode Knob (14) for 2-3 seconds. The Bluetooth Output (BTT) indicator will turn blue and starts flashing. The
unit will search for your Bluetooth speakers automatically.
3. If your Bluetooth speakers are on and the Bluetooth function is activated, the unit and speakers will pair automatically. It will take
about 20 seconds to 2 minutes for the pairing process to be completed, depending on your Bluetooth speakers. Ifthe unit and
the Bluetooth speakers paired successfully, the Bluetooth indicator of the unit will turn solid blue.
4. To stop the pairing, press the Mode Knob.
Important Notes:
To connect the unit to another Bluetooth device, turn o the unit and restart it.
– When the unit is in Bluetooth-In Mode, you cannot enter Bluetooth-Out Mode.
– Deactivate the Bluetooth function of other devices to avoid connecting to the wrong speakers.
– Repeat steps 2 and 3 to reconnect if the first pairing fails.
– In some circumstances, the Bluetooth connection may be interrupted by strong interference, or the device being in a location
that is more than required connection distance or there is an object moving in between both Bluetooth devices. Most devices will
reconnect automatically within a few seconds. If not, reconnect manually.