Users Manual

RECORD PLAYER | 12
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
General
No power
No power at the outlet Try another power outlet
The power adapter is not connected correctly
Connect the power adapter to the unit and wall outlet
correctly
The POWER ON/OFF knob is on the "Power O"
position
Press and hold the POWER knob for 2-3 Seconds to turn the
unit on
Wrong power adapter
Ensure that you are using the correct Power Adapter that was
included with the accessory pack.
No sound output
from the built-in
speakers
The volume level is set too low Increase the volume
The input selector does not match the playback
source
Select the correct input source
The unit is connected to an audio out source,
such as external speakers, headphones, or
Bluetooth speakers
Ensure there is no connection to audio output sources.
Remove the aux out/Bluetooth output, or RCA cables
The unit fails to
respond
It might result from external factors such as ESD
(Electro-static discharge)
Disconnect the power cord and external audio device. Replug
the power cord after one minute
Turntable
Power is on, but
the platter does not
turn
The Turntable PHONO mode is not selected Press the MODE knob to select the PHONO mode
The Auto-stop feature is activated and the tone
arm is set to Stop (mostly it is inside the spin or at
the tonearm holder)
The tone arm should be in the correct position during
playback