Users Manual

RECORD PLAYER | 8

OPERATING INSTRUCTIONS

Initial Setup

1. Place the unit on a ﬂat and level surface that is stable and free from vibration.

2. Remove the cable tie that is holding the tonearm.

3. Connect the AC adapter to the power jack of the unit.

Note:

• This product should only be operated by the type of power source indicated on the rating label.

• Plug the AC power adapter to a power outlet after assembly is completed. Before turning the power on, check that all the

connections are correct.

• Always turn o the power when connecting or disconnecting the unit.

Ampliﬁer Connection (If Required)

• Use an RCA cable (not supplied) to connect the unit to the external ampliﬁer (not supplied):

– Connect the red plug to the R/H channel input.

– Connect the white plug to the L/H channel input.

Note: You may opt to listen to this unit using the built-in speakers or through the headphone jack.