User Manual

ELECTRONIC KEYBOARD | 6 ELECTRONIC KEYBOARD | 7

1. Stool

2. X stand

3. Music rest

4. Headphone

5. Headphone jack

6. Microphone jack

7. DC 9V jack

8. Wrench and Screw

BEFORE PLAYING YOUR KEYBOARD

Power Supply

. Using AC-DC power adapter

Please use the power adaptor equipped with this electronic

keyboard or the power adaptor with DC 9V output voltage,

500mA output current and central anode plug.

Insert the DC plug of power adaptor into the DC 9V power jack

at the back of the keyboard, then insert the other end into the

Main socket.

Note: The input voltage of power adaptor must conform to the

voltage of Mains.

Press the Power on/o button and start playing.

Caution:

Disconnect the power adapter when your instrument is not in

use for an extended period of time to prevent possible damage.

. Using batteries

Open the battery compartment cover located at the bottom of

the instrument.

Insert eight 1.5V D size LR-20 batteries. Follow the polarity

marking on the cabinet. Close with the compartment cover, and

make sure that it locks ﬁrmly in place.

1.5V

1.5V 1.5V

Caution:

1. Do not use dierent types of batteries.

2. Do not mix old and new batteries for use. In case electrolyte

leaks in the battery compartment, wipe it o completely before

replacing with new batteries. Remove the batteries if the key-

board is not in use for an extended period of time.

Rear External Connections

. Using microphone

Standard microphones can be plugged into the MIC jack.

ACCESSORIES

Assembly instructions for X stand:

Fix the two bottom stands on the two feet of the

X framework with screws and the wrench.

Fix the two beams on the two top points of the X

framework with screws and the wrench.