Use and Care Manual
model
foundation
W1 L1
greenhouse
W2 L2
Riga S II
249 232 233 216
Riga S III
249 338 233 322
Riga S IV
249 443 233 427
Riga III
312 338 296 322
Riga IV
312 443 296 427
Riga V
312 549 296 533
7
Foundation plan Riga S/Riga
all dimensions in [cm]
Foundation of your greenhouse with a strip foundation
If you have not purchased a foundation frame secure the greenhouse by means of
a strip foundation. Create the foundation in accordance with the specified
dimensions below.
Concrete masonry units are also a good choice
Please make sure that the foundation is level in all directions.
Then anchor the greenhouse with the included mounting brackets (V15)(minimum)
Screws and anchors are not included.
exterior edge of the foundation
exterior edge of the greenhouse
upper edge of ground
frost-free ground
W1
W2
Suggestion: Assemble the lower frame (soil profiles 1.1/2.1,
soil profile corner V9) of the greenhouse to use as a template to
create a stone or concrete foundation. Make sure the corners
are square. This will prevent any errors in measurement.
Centimeters divided by 2.54 = inches For instance 233cm/2.54=91.7in
Creating a stone/cement base is not required. The greenhouse can be
placed directly on the ground.
(Option) Opening for Door Drop Kit-3*ODIFT8JEFY*ODIFT5BMM