User's Guide
ENTRY SETTINGS
ENTRY BEHAVIOR
Entry Behavior is where you set the Default State for the Entry. See ENTRY STATE MANAGEMENT.
ENTRY/EXIT HARDWARE
Entry/Exit Hardware is where you can select a relay to use on the ACU (or expansion board), like for
controlling electric strikes or maglocks.
● Port – select which port to assign the reader, from Relay 1-4. Technically, the electric strike is
wired to one of the 4 ACU ports, and the reader is wired to the strike. You will need to select the
ACU relay for which this reader/Entry is wired to the ACU.
● Open Entry Time – enter a time for how long the Entry remains unlocked before reverting
back to its default state.
● Unit – select whether to use seconds or minutes.
Version 1.9
©
Openpath 2019
Page 23