Installation Guide
WIRING TO LEGACY PANELS
To support a legacy access control system, install the ACU between the Openpath readers and the
legacy panel, with the ACU Wiegand port configured as output to the legacy panel. Replace low
frequency (LF) Wiegand readers with LF Openpath readers and high frequency (HF) Wiegand
readers with HF Openpath readers. In this setup, the legacy panel controls all locking hardware and
entry mechanisms while the Openpath system allows you to use the Openpath mobile app, Smart
reader, and Touch functionality.
Version 1.5
©
Openpath 2019
Page 12